Table of Contents
Advertisement
34
www.aeg.com
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
first programme on the top right of
the programme dial is Eco 40-60, the
programme to which the information
of the energy label relates.
The indicator of the Start / Pause
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators will light up and the
given information will change on the
display accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
11.6 Starting a programme
Touch the Start / Pause
start the programme. It is not possible to
start the programme when the indicator
of the button is off and doesn't flash (e.g.
programme dial on a wrong position).
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
11.7 Starting a programme
with the delay start
1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. On the display
the indicator shows
2. Touch the Start / Pause
The appliance door locks and starts
the countdown of the delay start. The
display shows the indicator
.
button to
button.
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start / Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows
and the indicator
3. Touch the Start / Pause
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start / Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start / Pause
again to start the new countdown.
11.8 The ProSense System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start / Pause
button, the maximum declared load
indicator goes off, the ProSense System
starts the laundry load detection:
1. The appliance detects the load in the
first 30 seconds. In the programmes
where Time Save is available, during
this phase the Time Save bars
placed below the time digits play a
simple animation. The drum rotates
shortly.
2. The programme duration could be
adjusted accordingly and could
.
button to
goes off.
button
button to
button
Advertisement
Table of Contents
