Table of Contents
Advertisement
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 79) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2)
Press qw.
f The [PICTURE MODE] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
[CINEMA]
[NATURAL]
[REC709]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
[USER]
Note
f Rec.709 is an abbreviation of "ITU-R Recommendation BT.709" and is a color standard of high-vision broadcasting.
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.
f If the <ENTER> button is pressed while [PICTURE MODE] is selected, the adjustment condition that is currently set can be saved as the
default setting of the selected picture mode. To save the adjustment condition in [USER] as the default setting, refer to "Saving the default
setting in [USER]" (x page 84). The data of all items except [SYSTEM SELECTOR] and [DEFAULT PICTURE MODE] in the [PICTURE]
menu are saved.
f If the [PICTURE] menu → [DEFAULT PICTURE MODE] is set to [AUTO], [GRAPHIC] is automatically selected when a new computer
signal is input and [STANDARD] is automatically selected when a new video signal is input. If the [PICTURE] menu → [DEFAULT PICTURE
MODE] is set to anything other than [AUTO], the picture mode set in [DEFAULT PICTURE MODE] is selected when a new signal is input.
Saving the default setting in [USER]
1)
Press as to select [PICTURE MODE].
2)
Press qw to select [USER].
3)
Press the <ENTER> button.
f The [PICTURE MODE] detailed screen is displayed.
4)
Press as to select [DEFAULT SETTING SAVE], and press the <ENTER> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <ENTER> button.
f The adjustment condition is saved as the default setting of the picture mode [USER].
Changing the [USER] name
1)
Press as to select [PICTURE MODE].
2)
Press qw to select [USER].
3)
Press the <ENTER> button.
f The [PICTURE MODE] detailed screen is displayed.
84 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
The image becomes suitable for video signals in general.
The image becomes suitable for movie contents.
The image becomes suitable for using in a relatively dark environment.
The image becomes Rec.709 compliant when the setting other than [PICTURE MODE] is set to the
factory default.
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
The light output is maximized for use in bright areas.
The image becomes suitable for computer signal input.
Set any desired picture mode.
Advertisement
Table of Contents
