Setting An Access Password (Security Lock) - ViewSonic PJ588D User Manual

Setting an Access Password (Security Lock)

You can use the
.
projector When
"
Navgatng the
.)
OSD menus
:
Important
Keep the password in a safe place
you lose the password
Press the Menu button to open the OSD
7.
menu.
8. Press the cursor  button to move to the
Setup menu.
9.
Press the cursor  button to select
Advanced Feature and press Enter or .
10. Press the cursor  button to select
Security Lock.
11.
Press the cursor  button to select
Enable. (White text is selected.)
A password dialog box automatically ap-
pears.
You can only use the following four cursor
12.
buttons:    
in the password fields. You can use any
combination including the same arrow five
times, but not less than six. Press the cursor
buttons in any order to set the password.
When you confirm the password, OK ap-
pears.
13
( )
cursor arrow buttons
,
enabled the password
"
OSD on page 18 and
.
Without the password
,
contact your reseller for information on clearing the password
to set a password and
must be entered after
"
Settng the OSD Language
,
you will not be able to use the projector
ViewSonic
prevent unauthorzed
you power on the projector
"
on page 19 for
PJ588D/PJ568D/PJ508D
use of the
. (
See
help on usng
.
If
.