Connecting A Monitor - ViewSonic PJD5111 User Manual

Light, bright and versatile dlp projector with brilliantcolortm technology
Hide thumbs Also See for PJD5111:
Table of Contents

Advertisement

Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to
find your notebook's key combination.

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you
can connect the COMPUTER OUT signal output socket on the projector to an external
monitor with a VGA cable following the instructions below:
To connect the projector to a monitor:
1.
Connect the projector to a computer as described in
13.
2.
Take a suitable VGA cable (only one supplied) and connect one end of the cable to the
D-Sub input socket of the video monitor.
Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable
and connect the DVI end of the cable to the DVI input socket of the video monitor.
3.
Connect the other end of the cable to the COMPUTER OUT socket on the projector.
The final connection path should be like that shown in the following diagram:
Monitor
The COMPUTER OUT output only works when COMPUTER IN 1 or COMPUTER IN 2 is
made to the projector.
If you wish to use this connection method when the projector is in standby mode, make
sure the Active VGA Out function is turned on in the SYSTEM SETUP: Advanced menu.
See
"Active VGA Out" on page 38
Active VGA Out status
On (Default)
* The signal being displayed from COMPUTER OUT port depends on which signal
(COMPUTER IN 1 or COMPUTER IN 2) is selected for the projector.
14
Connection
VGA to DVI-
A cable
VGA cable
Active connector: *COMPUTER
IN 1/*COMPUTER IN 2/
COMPUTER OUT/AUDIO IN/
Off
"Connecting a computer" on page
Notebook or desktop
computer
or
and the table below for details.
Projector status
Power On
AUDIO OUT
N/A
VGA cable
Standby
Active connector:
COMPUTER
/
IN 1
COMPUTER OUT
IN/AUDIO OUT
N/A
/
AUDIO

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vs12440

Table of Contents