Motor Assy (Sled) (M902), Sp Motor Assy (Spindle) (M901); Electrical Adjustments; Test Mode; Md Section - Sony MDX-F5800 Service Manual

3-12. SL MOTOR ASSY (SLED) (M902), SP MOTOR ASSY (SPINDLE) (M901)
0 two screws
(P1.7 × 1.8)
qa retainer (SP)
qs SP motor assy
(spindle) (M901)
5 screw
(P1.7 × 1.8)
6 bracket (SL)
7 SL motor assy
(sled) (M902)
3 screw (PS2 × 8)
2 screw (PS2 × 4)
8 screw
(B2 × 3)
9 base (SL)
4 sensor board
1 Remove solders of motors
(M901, M902, M903).

ELECTRICAL ADJUSTMENTS

TEST MODE

This set have the test mode function.
<Set the Test Mode>
1. Turn ON the regulated power supply. (The clock is displayed)
[OFF]
Note: Press the button, if the clock is not displayed.
[4]
2. Push the preset button.
[5]
3. Push the preset button.
[1]
4. Press the preset button for more than two seconds.
5. Then the display indicates all lights, the test mode is set.
<Release the Test mode>
[OFF]
1. Push the button.

MD SECTION

MD section adjustments are done automatically in this set.

TUNER SECTION

Tuner section adjustments are done automatically in this set.
17 17
MDX-F5800
SECTION 4