Simple Steps To Start; Delay Start - Samsung DW60 7 Series User Manual

Hide thumbs Also See for DW60 7 Series:

Table of Contents

Operations

Simple steps to start

1. Open the door, and then load the dishwasher. Make sure to remove food remains and

waste on the dishes.

2. Apply detergent to the detergent dispenser. For better results, add rinse aids.

3. Press Power, and then select a cycle with necessary options (Half load, Speed Booster,

Hygiene Plus, and Delay Start). Some options may not be available depends on the

cycle.

4. Press START, and then close the door. The dishwasher starts the cycle after draining for

a few seconds.

NOTE

• To change the cycle after it has started, press and hold START for 3 seconds to cancel

the cycle. Then, select a new cycle.

• The default cycle is ECO.

• To resume after you have opened the door to stop the dishwasher while operating,

simply close the door.

You can delay the cycle starting time up to 24 hours in 1-hour increments. To increase the

delay time, press Delay Start. The hour displayed indicates the time at which the cycle will

start.

1. Open the door, and then load the dishwasher.

2. Press Delay Start to change the time in 1-hour increments.

- If you press and hold the button, the time will increase until you release the button.

3. Press START, and then close the door.

NOTE

To change the delay time once the dishwasher has started, press Power and restart the

dishwasher.

English

DW60BG750FSL_SA_DD68-00250K-00_EN.indd 38

2022-12-27 오후 5:17:31

Table of Contents