68012001081-JW
Chapter 4 : Status Indicators
Gauge
Top Display:
Top Display:
4.1.2
HAZLOC Battery Type Detection
This feature alerts you when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.
During power-up, the following scenarios occur if there is a mismatch:
•
The radio continuously displays Wrong Battery with red intelligent backlight.
•
The radio Voice Announcement announces the programmed Wrong Battery.
•
The battery icon blinks continuously.
•
A repetitive tone sounds.
•
The red LED blinks continuously.
NOTE:
The radio does not display any indication when the radio is connected to the charger, the radio
and battery match, or when the radio certification type is configured as None in Customer
Programming Software (CPS).
This feature is enabled through CPS configuration. Check with your dealer or system administrator for
more information.
4.2
LED Indications
The LED indications represent the operational status of your radio. A qualified technician can
permanently disable the LED indication by programming it.
Table 1: LED Indications
Indication
Solid red
Blinking red
Double blinking red
Rapid blinking red
22
Battery Charge
11% to 25%
10% or less (The gauge begins blinking at 10%)
Status
Radio is transmitting.
Radio is transmitting at low battery condition.
Radio is transmitting an emergency alarm or call.
Radio has failed the self-test upon powering up or encountered a fatal
error.
1