Physical Lock Kit And Vesa Mount Bracket Kit - Lenovo ThinkEdge SE30 User Manual

Physical lock kit and VESA mount bracket kit

Prerequisite
Before you start, read Appendix B "Important safety information" on page 51 and print the following
instructions.
Avoid contact with the hot computer. During operation, the computer becomes hot enough to burn the skin.
Before you touch the computer, turn off the computer, disconnect power, and wait approximately 30 minutes
for the computer to cool.
Note: The VESA mount bracket kit must work with the physical lock kit.
For access, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
Replacement steps
Attention: Use the screws (M3 x 4 mm x 3 pcs) provided by Lenovo to avoid any unpredictable damage to
your computer.
.
Chapter 5 CRU replacement
23