Remote Setup Of Units & Cameras; System Unit Setup; Camera Setup - Panasonic WV-CU360C Operating Instructions Manual

REMOTE SETUP of UNITS & CAMERAS
You can set up the system unit and the camera with the
setup menu by this controller.
You can use the controller to set up system units and cam-
eras.
This section describes the main remote setup procedures.
Some of the descriptions may not be applicable if they refer
to devices not equipped in your system.
For further information on the default settings and operating
procedures, refer to the Operating Instructions included
with the individual units.

System Unit Setup

1. Select the desired system unit compatible with PS
mode.
2. Press the SETUP/FUNCTION button for more than 2
seconds. The SETUP indicator lights up.
The Setup menu for the system unit appears on the
monitor.
SETUP
FUNCTION
3. To complete the setup, press the SETUP/FUNCTION
button for 2 seconds or more.
The SETUP indicator goes off.
Note: If you change the default baud rate or parity check,
the system unit setup function is disabled.
Keys used for system unit setup
UP
To move the cursor.
L R
L R
DOWN
STILL EL-ZOOM
To select a parameter.
– +
CAM
To execute the parameter or
enter a submenu
SET
MON
To return to the previous menu
ESC
35
Example of Setup Menu for WJ-MP204C
WJ-MP204C SETUP MENU x.xx
COMMUNICATION
SYSTEM

Camera Setup

1. Select the desired camera.
2. Press the CAM SETUP/CAM FUNCTION button for 2
seconds or more to access the Camera Setup menu.
The CAM SETUP indicator lights up.
CAM SETUP
CAM FUNCTION
Data
•
3. Move the cursor with the numeric buttons 2 (Up) or 8
(Down), then select a parameter with the buttons 6
(Right) or 4 (Left).
4. Press the CAM/SET button to execute the parameter or
enter a submenu.
5. To return to the previous menu, press the MON/ESC
button.
6. Press the CAM SETUP/CAM FUNCTION button for 2
seconds or more to complete the camera setup.
(Example of Camera Setup menu)
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
AUTO PAN KEY SEQ
DIGITAL FLIP OFF
LOCAL/REMOTE LOCAL
SPECIAL1
CAMERA
RS485 SET UP
MON CAM
LOGOUT
ESC SET
MON CAM
LOGOUT
ESC SET