Advertisement
Operation caution
1. DO NOT USE THE DRY FUNCTION FOR
ANY EL ECTRONIC PRODUCTS. DOING
SO CAN RESULT IN DAMAGE.
2. Remove excessive water of object
before they are loaded into the UV-C
appliance when using the dry and
disinfect+dry function.
3. Keep the object unfolded, uncovered
and unstacked before they are loaded
into the UV-C appliance, to enable the
maximum UV-C light exposure of the
surface. Surfaces must be directly
exposed to UV-C light in order to be
disinfected.
4. The UV-C appliance should only be
used in a stable upright position. object
with a concave shape with an open top
like a bowl or cup, should be placed in
an upside position when loading into the
UV-C appliance and keep the open side
uncovered.
5. Switch off the power before you
clean the UV-C appliance, do not use
volatile detergent like alcohol or
gasoline. Do not pour water on/into
the UV-C appliance. Just use a dry
cloth to wipe the UV-C appliance.
6. Do not immerse in water.
7. The disinfection effect is dependent
on the time of exposure to UV-C light
and surface condition.
8. UV-C light cannot disinfect shadow
areas on surfaces.
9. Moisture can impact UV-C effec
tiveness. Utilize the Dry Function as
needed. This UV-C appliance only
works under dry conditions, it's not
suitable for damp or wet locations.
10. Only use the UV-C appliance indoors.
11. Plants and/or materials that are
exposed to UV-C for a long time may
become damaged and/or discolored.
3
Advertisement
