Jog Dial; Storing Names And Telephone Numbers In The Jog Dial Directory - Panasonic KX-FP85 Operating Instructions Manual

JOG DIAL

Storing names and telephone numbers
in the JOG DIAL
For rapid access to frequently dialed numbers, the unit provides a JOG DIAL directory
(50 stations).
For your convenience, the following 2 stations have been pre-programmed.
HELP-FAX (1-800-435-7329): If you cannot correct a problem after trying the help function
(p. 8), call using this station (p. 23).
IQ-FAX-CS (IQ-FAX Customer Service Center)(1-888-332-9728): If you have a problem with
IQ-FAX, call using this station (p. 23).
If you do not need the above stations, you can erase them (p. 22).
1 Press DIRECTORY PROGRAM
Display:
Rotate
2 JOG DIAL
displayed.
Enter the name, up to 10 characters, by
3
following the instructions on the next page.
Example:
4 Press SET .
5 Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
6 Press SET .
To program other items, repeat steps 3 to 6.
Press
7 DIRECTORY PROGRAM
program.
To correct a mistake
Press or to move the cursor to the
incorrect character/number, and make the
correction.
20
directory!
.
USE JOG-DIAL OR
PRESS DIR.PROG.
until the following is
NAME=
NAME=Alice
NO.=
NO.=5552233
FLASH
REGISTERED
NAME=
to exit the
MUTE
(Insert)
FLASH
(Hyphen)
DIRECTORY PROGRAM
Helpful hint:
You can confirm the stored items on the
display (p. 23) or on the telephone number list
(p. 81).
Note:
.
When the following message is displayed in
step 6, you can only store 5 more items.
Display:
If there is no space to store new stations, the
following message is displayed in step 1.
Erase unnecessary stations (p. 22).
A hyphen or a space entered in a telephone
number counts as two digits.
To delete a character/number
Move the cursor to the character/number you
want to delete and press
Display
/
JOG DIAL SET
STOP
(Delete)
SPACE= 5 DIRS.
JOG-DIAL FULL
.
STOP