Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
MENU
1. Press
.
JOG DIAL
2. Rotate
displayed.
Display:
Press
and rotate
SET
the desired feature is displayed.
3. Press
SET
.
Programming table (cont.)
Code
Display & Feature
GREETING TIME
#54
To change the recording time for
your own TAD/FAX greeting
message (p. 51)
MESSAGE TRANS.
To transfer a recorded incoming
message to another telephone
#60
(p. 58)
TRNS-GREETING
#61
To check, record or erase a transfer
greeting message
ICM MONITOR
To hear an incoming message
#67
(ICM) from the speaker when the
answering device is recording the
message.
66
(cont.)
until the following is
ADVANCED MODE
JOG DIAL
until
(The default setting is in bold type.)
!
JOG DIAL
4. Rotate
setting is displayed.
5. Press
.
SET
MENU
6. Press
Note:
Step 4 may be slightly different depending on the
feature.
See page 60 for more details.
Settings
How the unit operates
"16s": Up to 16 seconds
16s
"60s": Up to 60 seconds
60s
1. Follow steps 1–3 above.
2. Rotate
ON
3. Press
4. Enter the transfer telephone
number.
5. Press
6. Press
OFF
This feature can be turned on/off
from a remote location (p. 57).
See page 59 for details.
CHECK
RECORD
ERASE
If you select "OFF", you cannot
monitor the incoming message.
ON
OFF
until the desired
.
to select "ON".
JOG DIAL
.
SET
.
SET
.
MENU
Advertisement
Table of Contents
