Battery Pack And Charging Procedure - Yamaha PW SYSTEM Manual

H. Battery Pack and charging procedure
Battery capacity
Battery charger lamp
indicator lamp
Battery
capacity
Battery capacity
indicator
indicator button
Charging
plug
Charging connector
Battery
capacity
indicator
Charging connector
Battery
capacity
indicator
Charging connector
Charging
connector
Charging
plug
Battery
capacity
indicator
lamp
Battery capacity
Battery
indicator button
capacity
indicator
Battery
capacity
indicator
Charging connector
The Battery Pack equipped for the Yamaha e-Bike Sys-
tems is a lithium-ion battery. The lithium-ion battery is
lightweight and offers superior capacity. However, it does
have the following characteristics.
• Its performance decreases in extremely hot or cold en-
Charger
display
• It naturally loses its charge.
The Battery Pack for the Yamaha e-Bike Systems also
has an embedded computer which notifies you of estimat-
ed residual battery capacity and suspected faults via the
battery capacity indicator lamp.
By pressing the battery capacity indicator button, you can
Power plug
display the residual battery capacity for approximately 5
Battery capacity
seconds.
indicator lamp
See "Checking the residual battery capacity" for the esti-
mate of the residual battery capacity. See "Troubleshoot-
ing" for information on fault flashing.
Do not use any other charger or charging method to
recharge the Battery Packs. Using any other charger
Battery capacity
indicator button
could result in fire, explosion, or damage the Battery
Packs.
Battery capacity
indicator lamp
IMPORTANT SAFETY INSTRUCTIONS — SAVE THESE
INSTRUCTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC
Battery capacity
indicator button
SHOCK, CAREFULLY FOLLOW THESE INSTRUC-
TIONS
Battery charger lamp
This manual contains important safety and operating
instructions for Battery Charger type PASC9 and
PASC10. Those types can be found in the labels on
the products.
Charger Before using Battery Charger, read all instructions
display
and cautionary markings on Battery Charger, Battery
Pack and product using Battery Pack.
Power plug
Only use the Battery Charger type PASC10 to charge
PASB2, PASB4, and PASB5 type Battery Packs for
Yamaha e-Bike Systems, while only using the Battery
Charger type PASC9 to charge PASB6 type Battery
Battery capacity
Pack for Yamaha e-Bike Systems. Other types of bat-
indicator lamp
teries may burst causing injury to persons and dam-
age.
NOTICE
Do not apply grease on the terminal of the Battery
Battery capacity
indicator button
Pack.
vironments.
WARNING
WARNING
54