Connections - Panasonic AG-VP320 Operating Instructions Manual

■ ■ ■ ■ ■ Connecting Amplifier (5.1 ch Surround system) [Digital connection]
DECK Dolby Digital Decoder Amplifier Speaker
DECK DTS (Digital Theater Systems) Decoder Amplifier Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS
bitstream is output from the DECK OPTICAL digital audio output connector. When DECK
is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality
audio in your home. [An optical digital audio cable (optional) is required when an optional
Dolby Digital decoder or DTS decoder is used.]
Notes on connecting an optical
digital audio cable (optional)
• Remove the attached cap, and firmly
connect the cable to the connector.
DVD/VCR DECK
(Rear)
Optical Digital
Audio Cable
(optional)
Caution for optical digital audio output connector:
• When connecting an amplifier (with an Optical Digital Input Connector) which does not contain the
Dolby Digital or DTS decoder, be sure to select "PCM" at "Dolby Digital" and "PCM" at "dts" in
Settings for DVD Operation "Audio Output" (see p. 53).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful
to your ears and damage your speakers.
• When a Dolby Digital/DTS decoder is connected, please select "Bitstream" at "dts" or "Dolby
Digital" in Settings for DVD Operation "Audio Output".
If "PCM" is selected, there will be stereo sound. (See p. 53.)
• Video CDs and CDs can be played as usual.
Note
• Some DTS decoders which do not support DVD-DTS interface may not work properly with DECK.
or
Surround
Speaker
Decoder with Dolby
Digital /DTS
Front
processing (optional)
Speaker
To Optical
Digital Audio
Input Connector
[5.1ch Surround system]
Center
Speaker
Amplifier
Subwoofer
Surround
Speaker
Front
Speaker
15