3. Operation panel
3-7. How to set the main part design stitch
3-7-1. Design stitching of main section
When sewing is performed by making the main part into a design stitch, sewing of effective groups is repeated as shown
below.
<Example>
Group 1 → Group 2 → Group 3 → Group 1 →...
0.5mm×5 stitches 2.0mm×3 stitches 4.0mm×2 stitches 0.5mm×5 stitches
To cancel the design stitching of the main part, press the key.
Design stitching of main section
1
Selecting a Design Stitch Number
2
30
Press the key in the home screen to design stitch the pitch of the main
part.
Press the key again to cancel the design stitching.
With the key, select the design stitch number (n1 to n9).
・ Design stitch registration is set in "Design stitch editing mode of main
part".
・ The design stitch sewing speed of the main part is set with P69 of the
memory switch.
S-7180A