Table of Contents
Advertisement
2. START POINT & CUE POINT
Cue points of video and song can be set with XW-J1. 4 cue points can be set on each deck.
A) How to set a START POINT
Load a track to a deck and search for the point you wish to set a start point using the JOG wheel (#10).
The visual waveform of the track displayed in vjay is a helpful aid when looking for a desired point.
Once you have decided where to set a start point, push SET CUE(#13) and that point will be saved as
the START POINT. (The START POINT is displayed as a white color dot on the sound wave form in vjay)
Once a START POINT is set, the track will jump to that point every time you push CUE PLAY(#14).
B) How to set a CUE POINT
Up to 3 CUE points can be set easily with the CUE 1, CUE 2 and CUE 3 buttons in the CUE POINT
area (#7). CUE points are saved to tracks when a CUE button is pushed. Push the CUE button again
to jump to a saved CUE point. CUE points can be deleted by pushing SHIFT (#23) together with each
CUE button. (CUE points are displayed as red, green and blue dots on the sound wave form in vjay)
3. AUTO LOOP & BOUNCE LOOP
Loops are fun to play with, and also helps you add a little extra to your mix.
A) How to use AUTO LOOP
The AUTO LOOP button located in the AUTO LOOP area (#5) creates loops at a fixed length.
Push HALF to shorten the loop length by half and push DOUBLE to double the loop length.
Push AUTO LOOP again to exit the loop.
B) How to use BOUNCE LOOP
Use the 1/8, 1/4 and 1/2 buttons in the BOUNCE LOOP area to trigger loops for fixed lengths only
while the buttons are pushed. When the loop is turned off (when you release the button) the playback
position is returned to the position where it would be if it had not entered the loop. Loops set with
BOUNCE LOOP are great for creating instant stutter effects.
15
Advertisement
Table of Contents
