Wireless User Connections; Projector Operations; Computer Operations - Panasonic PT-LB10NTU User Manual

Other Applications

Wireless user connections

If the projector and computer could not be connected by following the steps on page
16, connect them by performing the steps below.
I Projector operations
Select [NETWORK] on the network
1
menu, and press the [ENTER]
button.
Select [USER] with the [
2
buttons, and press the [ENTER]
button.
I Computer operations
1
Start up the wireless card utility.
Make the same SSID,
communication mode and WEP
settings as the default projector
network [USER] settings.
2
Open the Windows TCP/IP Setting window.
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the "255" part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.
Setting Example
Setting item
Subnet mask
IP address
3
Start up Wireless Manager ME, and select [USER] from
the network number list.
Wait until the projector's host name appears on the connection list, select the
host name displayed, and proceed with the connections.
(Changing the Initial Settings)
]
Default projector network [USER] settings
SSID
Communication mode : 802.11 AdHoc
WEP
Default projector network
[USER] setting
255. 255. 255. 0
192. 168. 10. 100
(See page 28)
30
N E T W O R K
NETWORK
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
DEFAULT
SELECT
ENTER
N E T W O R K
USER
ADJ ENTER
: Panasonic Projector
: Off
Example of
computer setting
255. 255. 255. 0
192. 168. 10. 101
(cont.)
1
OFF
ON
RETRN
RETRN