Advertisement
In case of technical problems,
♦
switch off the product and do not
attempt to repair it yourself. Return
the appliance to an authorised
service facility for examination,
adjustment or repair. Always
insist on the use of original spare
parts. Failure to comply with the
above mentioned precautions and
instructions, could affect the safe
operation of this product.
Additional safety instructions for
Dehumidifiers
Install the unit on flat and hard floor
♦
to diminish vibration or noise.
Always operate the appliance on a
♦
smooth, even, stable surface. Do
not place the unit on a hot surface.
Ensure that the unit is switched off
♦
after use.
Do not immerse cables, plugs or
♦
any part of the appliance in water
or any other liquid.
Operate the unit only at the voltage
♦
specified.
Do not use the unit near open
♦
windows, as contact with rain and
other natural elements could cause
an electrical hazard
Do not put heavy objects on the
♦
appliance.
Do not tip the unit on its side.
♦
Never insert any other object into
♦
the unit body to avoid any hazard
or unit failure.
(Original instructions)
Do not put the unit close to
♦
heat-generating devices or
near flammable and dangerous
materials.
If the supply cable is damaged,
♦
it must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard
The appliance must be positioned
♦
so that the plug is accessible.
WARNING: Do not place the unit
on or near a hot gas electric burner.
Electrical safety
WARNING: Before use, check that the mains
voltage corresponds to the voltage on the rating
plate.
This product must be earthed. Always
check that the mains voltage
corresponds to the voltage on the rating
plate.
♦
Appliance plugs must match the outlet. Never
modify the plug in any way.
♦
Do not use any adapter plugs with earthed (Class
1) appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
♦
To avoid the risk of electric shock, do not immerse
the cord, plug or appliance in water or other liquid.
Extension cables & class 1 product
♦
A 3 core cable must be used as your tool is
earthed and of class 1 construction.
♦
Up to 30m (100 ft) can be used without loss of
power.
♦
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
BLACK+DECKER Service Centre in order to avoid
a hazard.
WARNING: Before assembling, switch the
appliance off and remove the plug from the socket.
ENGLISH
5
Advertisement
