Zanussi ZOFR5005 Manual page 9

USING YOUR HEATER
Operating Instructions
Quick Use
Press the On/Standby Button to turn on the heater. The
default setting is high power at 35°C.
Press and hold the Temperature Up [ + ] or the
Temperature Down [ - ] to quickly set the heater to a
desired temperature. After 1 minute, the temperature
setting screen will exit.
Setting a Timer
Your heater can be scheduled to switch on at a certain
amount of time.
When the Heater is in Standby Mode, press the Timer
button [ ] and then set the time by pressing the '+' or
'-' buttons.
The heater can be set in hour increments up to a
maximum of 24 hours. When the timer is at 0, press the
'-' key to set for 24 hours. When the timer is at 24, press
the '+' key to set it to 0. When the desired time is
displayed, press the Timer button or the Mode button
to set/confirm the time.
When the heater reaches the time, it will emit an
audible beep and the heater will switch on
9