Preparation
Supplied accessories
Remote control unit
(g1)
Pages 3 and 6
•
Operation manual (This publication)
Attaching the stand unit
•
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are 8 screws (4 short screws
and 4 long screws) with the stand unit.
2
Attach the supporting post for the stand unit
onto the base using the 4 long screws with the
hex key (supplied) as shown.
AC cord (g1)
Product shape varies in some countries.
Page 8
Hex key
Long screw
Cable clamp (g1)
Page 8
•
"AAA" size battery (g2) ... Page 6
3
Inserting the stand.
1
Insert the stand into the openings on the
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
2
Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
Short
screw
Soft
cushion
NOTE
•
To detach the stand unit, perform the steps in reverse
order.
Stand unit (g1)
Page 5
Hex key
5