Link To Cell; Link To Cell Feature; Registering A Cellular Phone - Panasonic KX-TG6582T Operating Instructions Manual

Link to cell feature

To use this feature, you must first
register and connect your cellular
phones to the base unit (page 15).
Your cellular phones must be Bluetooth
wireless technology compatible with this
product.
This feature allows you to:
– make or answer cellular calls using
your home phone (handset or base
unit) with better reception.
– maximize the benefits of cellular
services (such as free night and
weekend calls, or cellular to cellular
call plans) by utilizing unused peak
minutes with your home phone.
– conserve the battery power of your
cellular phone while the unit is on a
cellular call. (We recommend
charging your cellular phone during
the cellular call as your cellular phone
battery is being consumed.)
Important:
L Up to 2 cellular phones can be
registered. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
L Locate your cellular phone near the
base unit. If the cellular phone is too
close to the base unit during a cellular
call, you may hear noise. For best
performance, we recommend placing
the cellular phone between 0.6 m to 3
m (2 feet to 10 feet) away from the
base unit.
Trademarks
®
L The Bluetooth
are owned by the Bluetooth SIG, Inc.
and any use of such marks by
Panasonic Corporation is under
license. Other trademarks and trade
For assistance, please visit http://www.panasonic.com/help
word mark and logos
names are those of their respective
owners.
Registering a cellular
phone
Important:
L For more details and the list of
compatible cellular phones, please
visit our Web site:
http://www.panasonic.com/LinkToCell
L Before registering a Bluetooth
enabled cellular phone to the base
unit:
– we recommend you change the PIN
(page 18).
– make sure that no Bluetooth device
such as a Bluetooth headset is
connected to your cellular phone.
1
Handset:
{MENU} i
For CELL 1: {#}{6}{2}{4}{1}
For CELL 2: {#}{6}{2}{4}{2}
L After the CELL 1 or CELL 2
indicator on the base unit starts
flashing red, the rest of the
procedure must be completed
within 5 minutes.
2
Your cellular phone:
While the CELL 1 or CELL 2
indicator is flashing red, follow the
instructions of your cellular phone to
enter the registration mode.
L Depending on your cellular
phone, it may ask you to enter the
base unit PIN (default: "0000").
3
Handset:
Wait until a long beep sounds.
L It may take more than 10 seconds
to complete registration.
L When the CELL 1 or CELL 2
indicator lights green, the cellular

Link to Cell

15