Automatic Answering Operation; Setting The Unit To Answer Calls - Panasonic KX-TG2583 Operating Instructions Manual

Automatic Answering Operation

When the unit answers a call, a greeting message is played and the
caller's message is recorded. While recording, "- Answering -" will
flash on the base unit display.
•The total recording time (including greeting message) is about
15 minutes. If messages are recorded in noisy rooms, the time may
be shortened by up to 3 minutes.
•A maximum of 64 messages (including greeting message) can be
recorded.

Setting the Unit to Answer Calls

Press
(ANSWER!ON)
system.
•The indicator lights and "Answer set" is
heard.
•The unit will announce the remaining
recording time if it is less than 5
minutes.
•If you hear "Memory full", "Message
full" is displayed on the base unit
and the ANSWER ON indicator
flashes rapidly, erase some, or all, of
the messages (p. 59).
•If you do not want the unit to answer calls, press (ANSWER!ON) again to turn off
the answering system. The indicator light goes out and "Answer off " is heard.
•You can also turn on the answering system remotely using any other phone
(p. 65).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the base unit
speaker.
To answer the call with the base unit, press
handset, press
If the call monitoring feature is not required, turn it off by pressing and
holding
(STOP/EXIT)
in the standby mode, the feature will turn on or off.
(STOP/EXIT)
While a call is being recorded, you can turn the feature ON by pressing
or .
Ñ
56
to turn on the answering
. The unit stops recording.
(TALK)
in the standby mode. Each time you press and hold
ANSWER ON
Indicator
(ANSWERÒON)
(DIGITAL!SP-PHONE)
,
(STOP/EXIT)
. For the
Ö