Table of Contents
Advertisement
Quick Links
User Manual
C*H80*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
•
An administration fee may be charged if either
‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Advertisement
Table of Contents
Related Manuals for Samsung C27H800
Summary of Contents for Samsung C27H800
- Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
-
Page 2: Table Of Contents
Before Using the Product Connecting and Using a Source Device Screen Setup Securing the Installation Space Read below before installing the monitor. SAMSUNG MAGIC Bright Precautions for storage Connecting and Using a PC Brightness Connection Using the HDMI Cable Safety Precautions... - Page 3 Table of contents Setup and Reset Troubleshooting Guide DisplayPort Ver. Requirements Before Contacting Samsung Customer Service Center DP OUT Testing the Product Checking the Resolution and Frequency FreeSync Check the following. Smart ECO Saving Q & A Off Timer Plus...
-
Page 4: Before Using The Product
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) -
Page 5: Cleaning
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed. -
Page 6: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 7: Operation
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •... - Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •...
-
Page 9: Preparations
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―... -
Page 10: Direct Key Guide
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if is enabled. Eye Saver Mode Brightness Volume... -
Page 11: Function Key Guide
JOG button in the function key guide screen. Press to enable or disable Eye Saver Mode. The items below are not available if the function is enable. Eye Saver Mode • → SAMSUNG Picture Bright, Brightness, Color, Game Mode MAGIC • → System Smart ECO Saving Selects to turn the Monitor off by moving the JOG button in the function key guide screen. - Page 12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down Power Off PRESS(ENTER) for 2 seconds When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action Move the option...
-
Page 13: Changing Brightness, Contrast And Sharpness Settings
Set the input volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on Brightness the product. ― This menu is not available when SAMSUNG is set to mode. ― What is Auto Mute? Bright... -
Page 14: Reverse Side
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP OUT POWER IN HDMI IN DP IN Port Description Port Description Connect the power cord for your monitor to the POWER IN port on the back Connects to a source device using a USB Type-C cable. -
Page 15: Adjusting The Product Tilt And Height
Adjusting the Product Tilt and Height Rotating the Monitor Screen ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― You can rotate your monitor as shown below. ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -
Page 16: Anti-Theft Lock
Caution Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: •... -
Page 17: Precautions For Moving The Monitor
Precautions for moving the monitor • • Do not directly apply pressure on the screen. Do not hold the product upside down only by the stand. • Do not hold the screen when moving the monitor. • • Hold the lower corners or edges of the When moving the monitor, rotate to portrait monitor when moving it. -
Page 18: Installing A Wall-Mount Kit Or Desktop Stand
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 19: Installation
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Insert the stand neck into the stand base in the Check that the stand neck is firmly connected. -
Page 20: Removing The Stand
Removing the Stand ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Place the protective Styrofoam (cushion) included Push the key upward and hold. -
Page 21: Connecting And Using A Source Device
HDMI IN ― When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded. -
Page 22: Connection Using The Hdmi-Dvi Cable
USB Type-C port. ― Make sure that the USB Type-C cable complies with the USB PD specification. Otherwise, your devices may be damaged. A Samsung branded cable is recommended. -
Page 23: Connection Using The Dp Cable
Connection Using the DP Cable Connecting an External Monitor Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. Connection Using an DP Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. -
Page 24: Connecting The Product To A Pc As A Usb Hub
Utilizing the Product as a USB HUB Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/ Connecting a PC to the Product output ports available. -
Page 25: Connecting The Power
― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source. Connecting the Power ― The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered off. -
Page 26: Tidying Up The Connected Cables
Tidying Up the Connected Cables Tilt the display, as shown in the figure. Rotate the machine to the highest vertical Connect the corresponding cables. Arrange the cables through the groove on the position. COVER-REAR, and then attach the COVER-REAR SUB. When you attach the COVER-REAR SUB, please aim six ribs of the COVER-REAR SUB to the bottom holes of the COVER-REAR at first. -
Page 27: Correct Posture To Use The Product
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. -
Page 28: Screen Setup
Standard: Obtain a picture quality suitable for editing documents or using Internet. • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. SAMSUNG MAGIC Bright • Contrast: Obtain balanced brightness through automatic contrast adjustment. -
Page 29: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG is set to mode. Bright Cinema... -
Page 30: Samsung Magic Upscale
SAMSUNG MAGIC Upscale Eye Saver Mode function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG Upscale MAGIC The function has more obvious effects on low-resolution pictures. -
Page 31: Picture Size
Picture Size Screen Adjustment ― This menu is only available when Change the picture size. is set to Mode. Picture Size Screen Fit ― This option is not available when When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, is enabled. -
Page 32: Adjusting Osd (On Screen Display) Settings
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Position from what is shown. -
Page 33: Setup And Reset
Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ DisplayPort Ver. from what is shown. -
Page 34: Dp Out
Checking the current output mode of DP OUT. DP OUT When the DP OUT is connected, the mode in which signals are output to the next monitor is displayed on the SOURCE OSD. If has no signal output, “- -” is displayed. DP OUT Select the input signal to output to the next monitor and the output mode to simplify the connection and control of displaying devices. - Page 35 How to use DP OUT? to the desired option in the OSD menu. DP OUT Connect the DP cable between the DP OUT port and the next monitor. in the Screen resolution (Screen settings for Windows 10): Right-click the Windows desktop → Click Screen resolution (or click Display settings for Windows 10).
-
Page 36: Freesync
The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. • The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center. -
Page 38: Smart Eco Saving
Smart ECO Saving PC/AV Mode function reduces power consumption by controlling the electric current used by to AV. The picture size will be enlarged. Smart ECO Saving PC/AV Mode the monitor panel. This option is useful when you view a movie. ―... -
Page 39: Source Detection
Source Detection Information Select either as the method to recognize input signal. View the current input source, frequency and resolution. Auto Manual ― This menu is not available when the mode is selected for OUT. Key Repeat Time Control the response rate of a button when the button is pressed. sec, or can be selected. -
Page 40: Installing The Software
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com. -
Page 41: Troubleshooting Guide
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 42 Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
-
Page 43: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. •... -
Page 44: Specifications
AC 100 - 240 V – (+/- 10 %), 50/60 Hz ± 3 Hz Power Supply ― For detailed device specifications, visit the Samsung Electronics website. Refer to the label at the back of the product as the standard voltage can vary in different countries. -
Page 45: Standard Signal Mode Table
Standard Signal Mode Table 30 – 81 kHz Synchronization Horizontal Frequency 50 – 75 Hz Vertical Frequency 1920 x 1080 @ 60 Hz Resolution Optimum Resolution 1920 x 1080 @ 60 Hz Maximum Resolution If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. - Page 46 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 65.290 59.954 146.250 VESA, 1680 x 1050 67.500 60.000 148.500 VESA, 1920 x 1080 ― Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.
-
Page 47: Appendix
• Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •... -
Page 48: Extended Warranty
Samsung guarantee that replacement parts will be available for 5 years after the end of production. After 5 years, in the event that the Samsung’s service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no additional charge. If the model you...