13. ENVIRONMENTAL CONCERNS..............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
Page 5
ENGLISH 2.4 Use • Do not use multi-plug adapters and extension cables. • Do not put flammable products or • Make sure not to cause damage to items that are wet with flammable the mains plug and to the mains products in, near or on the appliance.
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply.
ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.
Indicator Description Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when you select a programme with the dry‐...
Page 9
ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...
Consumption values Water (l) Energy (kWh) Duration (min) 1)2) Programme Quick 10.2 0.620 10.6 0.990 1h 30min 10.6 0.990 2h 40min 12.4 1.170 0.835 AUTO Sense 11.6 1.110 Machine Care 0.510 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
Page 11
ENGLISH You can change the basic settings in To enter setting mode, press and hold setting mode. simultaneously about 3 seconds. When the appliance is in setting mode, The lights related to the Previous, OK the bars of the ECOMETER represent and Next are on.
Page 13
ENGLISH in the same cycle or at the beginning of Acoustic signals sound also the next programme. This activity when a malfunction of the increases the total water consumption of appliance occurs. It is not a programme by additional 4 litres and possible to deactivate these the total energy consumption of a signals.
6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound.
ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 16
• The ECOMETER indicates the The appliance senses the type of load level of energy and water and adjusts a suitable wash cycle. consumption. During the cycle, the sensors operate • The display shows the several times and the initial program programme duration.
ENGLISH door, the appliance continues from the • When the programme is completed. point of interruption. • After 5 minutes if a programme was not started. If the door is opened for more than 30 seconds 8.10 End of the programme during the drying phase, the running programme ends.
Page 18
• The arrangement of the items in the results and hard-water filming or baskets is correct. spotting on the items. Using too much • The programme is suitable to the type detergent with soft or softened water of load and the degree of soil.
ENGLISH 10. CARE AND CLEANING • Do not use abrasive products, WARNING! abrasive cleaning pads, sharp tools, Before any maintenance strong chemicals, scourer or solvents. other than running the • Wipe clean the door, including the programme Machine Care, rubber gasket, once a week. deactivate the appliance and •...
Page 20
5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
ENGLISH 10.6 Cleaning the lower spray 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
Page 22
Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
Page 23
ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
Page 24
The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
Page 25
ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...
13. MILIEUBESCHERMING................... 53 VOOR PERFECTE RESULTATEN Bedankt dat je voor dit AEG-product hebt gekozen. We hebben het gecreëerd om jarenlang onberispelijke prestaties te leveren, met innovatieve technologieën die het leven eenvoudiger maken – functies die je wellicht niet op gewone apparaten aantreft.
Page 28
Bewaar de instructies altijd op een veilige, toegankelijke plek voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare personen Dit apparaat kan worden gebruikt door kinderen van 8 •...
NEDERLANDS accommodaties waar dergelijk gebruik de (gemiddelde) huishoudelijke gebruiksniveaus niet overschrijdt. De specificatie van dit apparaat niet wijzigen. • De waterdruk (minimaal en maximaal) moet liggen • tussen 0.5 (0.05) / 10 (1.0) bar (MPa) Volg het maximale aantal 13 plaatsen. •...
Page 30
• Installeer het apparaat op een veilige • Zorg ervoor dat er geen zichtbare en geschikte plaats die aan alle waterlekken zijn tijdens en na het installatie-eisen voldoet. eerste gebruik van het apparaat. • Gebruik het apparaat niet voordat u •...
Page 31
NEDERLANDS • Houd er rekening mee dat afvoerfilters, binnenrekken en plastic zelfreparatie of niet-professionele randapparatuur zoals manden en reparatie gevolgen kan hebben voor deksels. de veiligheid en de garantie kan doen • Met betrekking tot de lamp(en) in dit vervallen. product en reservelampen die •...
3. PRODUCTBESCHRIJVING Bovenste sproeiarm Bestekmand Onderste sproeiarm Onderste korf Filters Bovenste korf Typeplaatje De afbeelding is een algemeen overzicht. Zoutreservoir Raadpleeg voor meer details Luchtventilatie andere hoofdstukken en/of Glansmiddeldoseerbakje documenten die bij het Afwasmiddeldoseerbakje apparaat zijn meegeleverd. 3.1 Beam-on-Floor...
NEDERLANDS 4. BEDIENINGSPANEEL Aan-uittoets / resetknop Optietoetsen (EXTRAS) Knop uitgestelde start AUTO Sense programmaknop Display MY TIME programma selectie balk 4.1 Scherm 4.2 ECOMETER De ECOMETER geeft aan hoe de programmakeuze het stroom- en waterverbruik beïnvloedt. Hoe meer balken er aanstaan, hoe lager het verbruik is.
5. PROGRAMMAKEUZE 5.1 MY TIME standaardprogramma voor testinstituten. met de MY TIME selectiebalk kunt u een geschikte vaatwascyclus selecteren op 5.2 AUTO Sense basis van de programmaduur. Het AUTO Sense programma past de vaatwascyclus automatisch aan aan het type lading.
Page 35
NEDERLANDS Programma Lading vaat‐ Mate van be‐ Programmafasen EXTRAS wasser vuiling Serviesgoed, Schoon, licht • Afwassen bij 60 °C • ExtraPower bestek gedroogd • Tussentijdse spoe‐ • GlassCare ling • Laatste spoeling 50 °C • AirDry 1h 30min Serviesgoed, Standaard, •...
Programma Lading vaat‐ Mate van be‐ Programmafasen EXTRAS wasser vuiling Machine Ca‐ Voor het reinigen van de bin‐ • Reinigen 70 °C niet van toepas‐ nenkant van het apparaat. • Tussentijdse spoe‐ sing Raadpleeg Onderhoud en rei‐ ling niging.
Page 37
NEDERLANDS Aantal Instellingen Waarden Omschrijving Waterhardheid 1L - 10L (stan‐ Aanpassen van het niveau van de water‐ daard: 5L) verzachter afgestemd op de hardheid van het water in je omgeving. Melding dat het On (standaard) Activeer of deactiveer het indicatielampje glansmiddelre‐...
Page 38
De lampjes van de Vorige, OK en 5. Druk tegelijkertijd op Volgende zijn aan. en houd ze ongeveer 3 seconden ingedrukt om de Een instelling wijzigen instellingsmodus te verlaten. Zorg dat het apparaat in de Het apparaat keert terug naar de instellingsmodus staat.
Page 39
NEDERLANDS Stel ongeacht het gebruikte soort droogfase. In dergelijke gevallen verlengt wasmiddel het juiste de regeneratie de totale duur van een waterhardheidniveau in om de programma met nog eens 5 minuten. bijvulindicator voor zout geactiveerd Vervolgens kan het spoelen van de te houden.
6.4 Eindsignaal LET OP! Probeer de deur van het U kunt een geluidssignaal activeren dat apparaat niet binnen 2 klinkt bij het beëindigen van het minuten na automatisch programma. openen te sluiten. Dit kan Er klinken ook het apparaat beschadigen.
Page 41
NEDERLANDS De wasfase start pas nadat deze LET OP! procedure voltooid is. De procedure Water en zout kunnen uit het wordt regelmatig herhaald. zoutreservoir stromen als u 7.1 Het zoutreservoir het bijvult. Start na het bijvullen van het LET OP! zoutreservoir onmiddellijk Gebruik uitsluitend grof zout een programma om corrosie...
U kunt de programmakeuzeknop kiezen (B) tussen stand 1 (laagste hoeveelheid) en stand 4 of 6 (hoogste hoeveelheid). 8. DAGELIJKS GEBRUIK 1. Draai de waterkraan open. Raadpleeg de instructies 2. Houd ingedrukt totdat het van de fabrikant op de apparaat wordt geactiveerd.
Page 43
NEDERLANDS • Het display geeft de bijgewerkte 2. Blijf op drukken tot het display de programmaduur weer. uitgestelde tijd toont die u wilt • De ECOMETER geeft het instellen (van 1 tot 24 uur). bijgewerkte niveau van stroom- Het lampje van de knop gaat aan. en waterverbruik aan.
• Als het programma is voltooid. Als de deur tijdens de • Als er na 5 minuten nog geen droogfase langer dan 30 programma is gestart. seconden wordt geopend, stopt het lopende 8.10 Einde van het programma. Dit gebeurt niet...
Page 45
NEDERLANDS 9.4 Voordat u een programma • Vaatwasmiddeltabletten lossen bij korte programma's niet geheel op. start Om te voorkomen dat vaatwasmiddelresten op het servies Zorg vóór het starten van het gekozen achterblijven, raden we u aan om programma dat: tabletten enkel bij lange programma's •...
Na voltooiing van het beschadigingen. programma kan er zich aan 2. Ruim eerst het onderrek en dan het de binnenkant van het bovenrek uit. apparaat nog water bevinden. 10. ONDERHOUD EN REINIGING De lampjes knipperen. Op het...
Page 47
NEDERLANDS 1. Demonteer het filtersysteem volgens de instructies in dit hoofdstuk. 2. Verwijder eventuele vreemde voorwerpen handmatig. 3. Monteer de filters opnieuw volgens de instructies in dit hoofdstuk. 10.4 Buitenkant reinigen 4. Was de filters. • Maak het apparaat schoon met een vochtige, zachte doek.
2. Was de sproeiarm onder stromend water. Gebruik een smal en puntig gereedschap, bijv. een tandenstoker, om de vuildeeltjes uit de gaten te verwijderen. LET OP! Een onjuiste plaatsing van de filters kan leiden tot slechte wasresultaten en het apparaat beschadigen.
Page 49
NEDERLANDS Probleem en alarmcode Mogelijke oorzaak en oplossing Je kunt het apparaat niet in‐ • Controleer of de stekker is aangesloten op het stopcon‐ schakelen. tact. • Controleer of er geen beschadigde zekering in het zeke‐ ringenkastje is. Het programma start niet. •...
Page 50
Probleem en alarmcode Mogelijke oorzaak en oplossing Het niveau van het water in • Schakel het apparaat uit en aan. het apparaat is te hoog. • Controleer of de filters schoon zijn. Op het display verschijnt • Controleer of de afvoerslang op de juiste hoogte boven iF1.
Page 51
NEDERLANDS De PNC treft u aan op het typeplaatje WAARSCHUWING! van de apparaatdeur. U kunt ook de We raden u aan om het PNC bekijken op het bedieningspaneel. apparaat niet te gebruiken Zorg er voordat u op de PNC kijkt, het totdat het probleem volledig apparaat in de programmakeuze staat.
Page 52
Probleem Mogelijke oorzaak en oplossing De glazen en borden vertonen • De vrijgegeven hoeveelheid glansmiddel is niet vol‐ vlekken en droge waterdrup‐ doende. Zet de dosering van het glansspoelmiddel op pels. een hogere stand. • De kwaliteit van het glansspoelmiddel kan de oorzaak zijn.
NEDERLANDS Probleem Mogelijke oorzaak en oplossing Dof, ontkleurd of afgeschilferd • Zorg ervoor dat alleen vaatwasserbestendige voorwer‐ serviesgoed. pen in het apparaat worden gewassen. • Laad de korf voorzichtig in en uit. Raadpleeg de folder voor het laden van de korven. •...
Page 54
Breng het product naar het milieustation...