Sony WH-CH520 Quick Start Manual page 105

Wireless stereo headset

Table of Contents

Help Guide

Wireless Stereo Headset

WH-CH520

Sound skips frequently.

Set the headset to "Priority on stable connection". For details, see

This issue can be improved by changing the wireless playback quality settings on the transmitting device. For details,

refer to the operating instructions supplied with the transmitting device.

Remove any obstacles between the antenna of the connecting Bluetooth device and the built-in antenna of the

headset. The antenna of the headset is built into the part shown in the dotted line below.

A: Location of the built-in antenna

Bluetooth communications may be disabled, or noise or audio dropout may occur under the following conditions.

When there is a human body between the headset and the Bluetooth device

When this is the case, turn the Bluetooth device to face the same direction as the antenna of the headset to

improve the Bluetooth communications.

When there is an obstacle, such as metal or a wall, between the headset and the Bluetooth device

In places with wireless LAN, where a microwave oven is used, electromagnetic waves are generated, etc.

Where there are other wireless communication audio devices or other people nearby, such as in train station

premises or on a crowded train

If you are enjoying music with your smartphone, the situation may be improved by closing unnecessary apps or

restarting your smartphone. If you are enjoying music with your computer, close unnecessary applications or

windows and restart the computer.

Connect the headset and the Bluetooth device once again.

Reset the headset.

Initialize the headset, and pair the headset and the device again.

Table of Contents

Yy2958