Page 2
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 3
Conference Flat Panel User Manual PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
Page 4
Conference Flat Panel User Manual Preface Applicable Models This manual is applicable to Conference Flat Panel. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.
Conference Flat Panel User Manual Chapter 1 Introduction The Conference Flat Panel (hereafter referred as 'the device') integrates functions of computers, projectors, interactive whiteboards, sound boxes, cameras (optional), HDTVs, advertising machines and so on. The device applies multiple technologies like 4K display, infrared touch, human-machine interaction, multi-media information processing, and network transmission, providing users with various features such as writing, annotating, multi-screen sharing, and remote video call (optional).
Conference Flat Panel User Manual Chapter 2 Operation and Maintenance Precautions The LCD panel on the device is made by high-precision technology. However, tiny spots on the screen that are always or never lit may be observed, or when observed from side, the color and brightness may appear to be uneven.
Conference Flat Panel User Manual ● Make sure the power supply is grounded. ● Do not let dust or metal attachment adhere to the power plug and socket. ● Do not modify the cable in any form. ● Do not place heavy object on the cable. ●...
Conference Flat Panel User Manual Chapter 3 Connection and Installation 3.1 Precautions for Installation ● Clean the device screen and back before installation for best performance. ● For safety, only use the wall mount or base provided by the manufacture. ●...
Conference Flat Panel User Manual Figure 3-1 Front Panel and Interfaces Table 3-1 Panel Description Description Description Multi-functional USB interface HDMI input interface 2 Environmental light sensor HDMI input interface 1 Power button Short press to turn to power- Network interface 2 saving status.
Page 12
Conference Flat Panel User Manual Figure 3-2 Connect to PC Note ● The Touch-USB interface is needed only when the user needs to touch operate the external PC on the device. ● Use high quality signal cable less than 10 meters in length for high HDMI signal transmission quality.
Conference Flat Panel User Manual 3.4 Internal Computer Installation Figure 3-3 Internal Computer Installation The computer box is installed at the side slot of the device. When installing the box, make sure its ventilation hole is facing the same direction with the rear panel as shown above. Fasten the screws to fix the box into position.
Page 15
Conference Flat Panel User Manual Figure 3-5 Wall Mounting Side View Note The wall mount is mobile horizontally. Please leave a space no less than 6 cm at each side (or 12 cm at one side), and 5 mm at the top and bottom for maintenance service.
Page 16
Conference Flat Panel User Manual Mobile Mounting Figure 3-6 Mobile Mounting...
Conference Flat Panel User Manual Chapter 4 Startup and Shutdown 4.1 Device Startup 4.1.1 Installed Without a Computer Box Steps 1. Connect the device to power supply. 2. Turn on the power switch, the power indicator on the front panel will turn red. 3.
Page 18
Conference Flat Panel User Manual power button to force shutdown). Then switch off the power to shut down the device. Note Switching off the power of the device directly leads to force shutdown of the computer box. Next time the device starts up, Windows may enter error recovery mode and screen touch will be disabled.
Conference Flat Panel User Manual Chapter 5 Menu Operations Note Software interfaces and functions may vary with device models. All pictures in this manual are for illustration purpose only. Turn on the device and go to the main page. The shortcut menu is displayed at the bottom of the screen.
Conference Flat Panel User Manual Table 5-1 Shortcuts Description Function Function Tap to hide the menu bar at the Tap to open all the windows of bottom. processes. Tap to return to the previous page. Tap to set the date and time. Tap to configure network Tap to select the input source.
Conference Flat Panel User Manual Figure 5-3 Control Menu Table 5-2 Control Menu Descriptions Tool Description Calculator Enable the built-in calculator. Note Take annotations on the current page. Camera Open the camera bound to the device. Screenshot Capture the current page. Stopwatch Measure the amount of time.
Page 22
Conference Flat Panel User Manual Figure 5-4 Take Annotations Table 5-3 Icon Descriptions Icon Description ● Pen color and size are customizable. ● Enable angled stroke or not. Tap to have lines with angled stroke, and to have lines without angled stroke. Erase the desired annotations.
Conference Flat Panel User Manual 5.5.2 Screenshot Go to → Screenshot, and a capture area pops up on the current page. Adjust the area by tapping and dragging the four corners. The screenshot toolbar pops up on the lower right corner of the area.
Conference Flat Panel User Manual Chapter 6 System Settings The screen displays the main page after the device is turned on. Slide the screen to the left of right to view applications, device status, and help documents. Left slide home screen to scan the code for feedback.
Page 25
Conference Flat Panel User Manual Proxy Settings When proxy enabled, you need to set Proxy Host and Port No., and set the URLs that do not use the proxy. Figure 6-2 Proxy Settings Static IP Settings When static IP enabled, you need to set network parameters, such as Static IP, Gateway, Subnet Mask, DNS1, and DNS2.
Conference Flat Panel User Manual Figure 6-3 Static IP Settings 6.1.2 Wireless Network Settings Steps 1. Go to Settings → Network → Wireless Network. 2. Enable WLAN, and you can add a new network or connect to an available network. Connect to Available Networks ●...
Page 27
Conference Flat Panel User Manual Figure 6-4 Wireless Network Information Add Other Networks Steps 1. Tap Add Other Networks. 2. Enter Wi-Fi name and select Security.
Conference Flat Panel User Manual Figure 6-5 Add Other Network 3. Optional: Check Display Advanced Settings to select proxy and network IP type. 4. Tap Connect to connect the device to the added wireless network. 6.1.3 WLAN Hotspot Settings When the device is connected to the wired network, it can provide wireless network for other devices with WLAN hotspot enabled.
Conference Flat Panel User Manual Figure 6-6 Hotspot Settings Note If the device supports both 2.4 GHz and 5 GHz, set 5 GHz as AP Frequency, and recommended channels as AP Channel for better experience functions such as wireless screen mirroring. 6.2 Display Settings Go to Settings →...
Conference Flat Panel User Manual Bluelight Filter Enable the function to protect your eyes by filtering blue light. Theme Set the device theme. Tap Settings to select a desired theme, and tap Apply. Wallpaper Tap Wallpaper to select a desired picture from wallpaper library or the system picture library as wallpaper, or restore to the default wallpaper.
Conference Flat Panel User Manual 6.4 Language and Input Settings Steps 1. Go to Settings → Language & Input. 2. Tap Language to select the desired language. 3. Tap Input Method to select the desired input method. Figure 6-9 Language and Input Settings Handwriting input is available, and the written content in any text input page will be automatically transformed into system font..
Conference Flat Panel User Manual Note If Time Sync is disabled, you can set date and time manually. 6.6 Application Management Steps 1. Go to Settings → Application Management. 2. Tap the desired application to check details. 3. You can perform operations, such as Forced Stop, Clear Data, Clear Cache, and Uninstall. Note The built-in applications cannot be uninstalled.
Conference Flat Panel User Manual 2. Enable Intelligent Detection. 3. Slide the slider to set Warning Temperature and Alarming Temperature. Note ● When the temperature exceeds the set warning temperature, the temperature in status bar on the upper right corner turns orange. ●...
Page 34
Conference Flat Panel User Manual Auto Switch When Connecting Signal Source If this function is enabled, the system will switch to the newly-connected input source when an external input source is connected. Auto Switch When Disconnected from Signal Source If this function is enabled, the system will switch to the configured input source as the device is disconnected from the external input source.
Conference Flat Panel User Manual Wake from Signal Source If this function is enabled, the device in standby status can be waken up if an input signal source is connected. HDMI Output Settings Connect the device through HDMI interface to share the contents. You can set the desired resolution, and enable audio and HDCP.
Conference Flat Panel User Manual Chapter 7 Intelligent Applications 7.1 FileBrowser Tap FileBrowser on the main page. All the files under the current directory are shown by default. Tap Image, Doc, AV, or Installation Package to view specified files. Icons are described as follows. Figure 7-1 File Management Table 7-1 Descriptions of File Management Icons Icon...
Conference Flat Panel User Manual Figure 7-2 Edit the Files Table 7-2 Descriptions of Editing Icons Icon Description Icon Description Copy the selected Select All Select all the files. Copy To file(s) to another folder. Move the selected Delete the selected Move To file(s) to another Delete...
Conference Flat Panel User Manual 7.3 System Pre-installed Applications The following table briefly describes the applications pre-installed in the system. Refer to the help document of desired application, to get more details. Note The system pre-installed applications vary from different device types. Table 7-3 Introduction of System Pre-installed Applications Application Introduction...
Conference Flat Panel User Manual Appendix A FAQs Question Cause and Solution Tempered glass is installed on the outer screen to provide protection. There is a gap between the screen and the tempered glass for air convection. The main reason is that there is a temperature difference between the screen and Why do the condensations appear the outside.