NEC MultiSync LCD1980SXi-BK User Manual page 12

Controls
OSM TURN OFF: The OSM control menu will stay on as long as it is use. In the
OSM Turn Off submenu, you can select how long the monitor waits after the
last touch of a button to shut off the OSM control menu. The preset choices are 10-
120 seconds by 5 second increments.
OSM LOCK OUT: This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in the Lock Out
mode, a screen will appear indicating the OSM controls are locked out.
There are three types of OSM LOCK OUT:
OSM LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the
OSM Lock Out function, press SELECT, then "+" key and hold down simulta-
neously. To deactivate the OSM Lock Out, press SELECT, then "+" key and
hold down simultaneously while in the OSM menu. BRIGHTNESS and
CONTRAST can be adjusted while in the lock out mode.
OSM LOCK OUT with no control: To activate the OSM Lock Out function,
press SELECT, then ">" key and hold down simultaneously. To deactivate the
OSM Lock Out, press SELECT, then ">" key and hold down simultaneously while
in the OSM menu. No controls can be adjusted while in the lock out mode.
OSM LOCK OUT with BRIGHTNESS (only) control: To activate the OSM Lock
Out function, press SELECT, then "–" and "<" keys and hold down simulta-
neously. To deactivate the OSM Lock Out, press SELECT, then "+" key and
hold down simultaneously while in the OSM menu. BRIGHTNESS can be
adjusted while in the lock out mode.
OSM ROTATION: To rotate OSM between Landscape and Portrait modes.
RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If ON is
selected, a message will appear on the screen after 30 seconds, notifying you
that the resolution is not at 1280 x 1024.
HOT KEY: You can adjust the brightness and contrast directly. When this
function is set to ON, you can adjust the brightness with
+ or - key, while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset most OSM
control settings back to the factory settings. Individual settings can be reset by
highlighting the control to be reset and pressing the RESET button.
Information
DISPLAY MODE: Provides information about the current resolution display and technical
data including the preset timing being used and the horizontal and vertical frequencies.
Increases or decreases the current resolution.
MONITOR INFO.: Indicates the model and serial numbers of your monitor.
OSM Warning: OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical
Sync. After power is turned on or when there is a change of input signal, the No Signal
window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After
power is turned on or when there is a change of input signal or the video signal doesn't have
proper resolution, the Resolution Notifier window will open. This function can be disabled in
the TOOL menu.
OUT OF RANGE: When the input signal is a non-supported timing or the video signal
doesn't have proper timing, the Out Of Range menu will appear.
NOTE: If "
For advanced user menu see "Appendix".
LCD1980SXimanual060704.p65
–continued
CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION.
10
10
or , contrast with
6/10/04, 9:28 AM