AEG LAVATHERM 65771DIH User Manual page 18

18 www.aeg.com
2. Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Move plastic connection in and install
water container.
4. To continue the programme press
the Start/Pause (/Pauze) button.
11.3 Cleaning the heat
exchanger
If the indicator Condenser (Condensor)
flashes, do the inspection of the heat
exchanger and its compartment. If there
is a dirt, clean it.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to do
not damage the metal
surface.
To do the inspection:
1. Open the door. Pull the filter.
2. Move the release button on the
bottom of the door to open the heat
exchanger door.
3. Turn the blockage to unlock the heat
exchanger cover.
4. Lower the heat exchanger cover.
5. If necessary, remove the fluff from
the heat exchanger and its
compartment. You can use wet cloth
and/or a vacuum cleaner with the
brush.