Table of Contents
Advertisement
After the program stops, select
the desired programme using the
Programme Selection button.
The new programme will
resume the course of the
old programme.
Press the Start/Pause button
to start the newly selected
programme.
7.2. Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
Press the Start/Pause
button for 3 seconds until
the End light flashes.
After the End light starts to
7.3. Switching the Machine Off
Disconnect the plug and turn
off the water tap.
When the End light illuminates,
switch your machine off using
the Power On/Off button.
NOTE: Do not open the door before the
programme is complete.
NOTE: Leave the door of your
machine slightly open at the end of a wash
programme to speed up drying.
NOTE: If the door of the machine is
opened or the power is cut during operation,
the programme will continue when the door
is closed or the power returns.
EN - 19
When the End light
illuminates, the programme
is cancelled.
flash, the water discharge
process will start and
continue for 30 seconds.
Advertisement
Table of Contents
