Download Print this page

Advertisement

Quick Links

PHILIPS 100LT BI-COLOR FACETED MINI
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
a)
b)
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.
c)
This seasonal use product is not intended for permanent installation or use.
d)
Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e)
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f)
Do not let lamps rest on the supply cord or on any wire.
g)
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h)
This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or
placed where small children can reach it.
i)
Do not use this product for other than its intended use.
j)
Do not hang ornaments or other objects from cord, wire, or light string.
k)
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l)
Do not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with push-in type LED lamps. Do not twist lamps.
n)
Use only with the Class 2 adaptor provided with this product.
o)
Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
p)
WARNING:
Risk of Fire, shock, or personal injury.
1) Use only with the included Class 2 adaptor.
2) Not for use on outlets controlled by a dimmer.
3) Use only on timer controlled outlets where the timer is rated for use with compact fluorescent bulbs (CFL) or LED bulbs.
4) Do not attempt to replace bulbs, they are not replaceable.
5) Do not use power adaptor if enclosure is broken or cracked, discard unit.
6) Do not use with a voltage converter.
7) The product and the adaptor shall not be installed within 10 feet of a pool, spa, fountain, or other areas of standing water.
Use and Care Instructions
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords,
cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
b) When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or brushes, to avoid
any undue strain or stress on the product conductors, connections and wires.
c) When not used, store neatly in a cool, dry location protected from sunlight.
d) Do not impact or drop the adaptor, if enclosure is broken or cracked, discard product.
Installation Instructions
1. Carefully remove product from packaging, be sure not to cut any wires.
3. Attach the light set connector to the adaptor by inserting the pins fully into the adaptor and screw on the holding ring.
4. Plug adaptor into wall outlet, lights should come on. For outdoor use, adaptor should be located in an outdoor outlet box where the adaptor
connections can be protected from falling rain (see instructions on adaptor for further information).
5. Make sure you do not connect more than three light sets to a adaptor.
Operating Instructions
See Quick Start Guide.
Troubleshooting Instructions
If lights do not work:
a) Make sure lights are connected to the Adaptor. Make sure connectors are fully inserted into the Adaptor, and are tight.
b) Make sure the adaptor is plugged into a 120V AC outlet.
c) Make sure the outlet has power (check to see if any switches or timers control the outlet) and not connected to a dimmer switch.
d) If used on a timer controlled outlet, make sure the timer is rated for use with compact fluorescent bulbs (CFL bulbs) or LED bulbs, if not,
use on a different circuit/outlet.
e) If plugged into a GFCI protected outlet, reset the GFCI in case it activated.
Call Customer Service at 1- 800-763-6177 Monday-Friday 9:00am – 5:00pm CST with any additional questions.
637990-278
For Indoor/Outdoor Use
Made In Cambodia

Advertisement

loading

Summary of Contents for Philips 100LT

  • Page 1 PHILIPS 100LT BI-COLOR FACETED MINI IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet.
  • Page 2 The FOLLOWING IS NOT PART OF INSTRUCTION SHEET Cord tags for Adaptor products – A cord tag as shown below for the correct country shall be placed on the lead in wire of the product (on the side AFTER the adaptor). This cord tag is so the consumer knows what adaptor goes with the product should they remove it for storage.