Troubleshooting - JVC KD-X282DBT Instruction Manual

References
Source name Display information: Main
BT AUDIO (For KD-X282DBT)
Song title/Artist
Effect* Album title/Artist
beginning
AUX Source name
Date back to the beginning
* During Music Synchronization Effect, the brightness level of the buttons changes and
synchronizes with the music level.
Available Cyrillic letters
Available characters
Song title/Artist with Music Synchronization
Playing time Date back to the
Source name with Music Synchronization Effect*
Display indications

Troubleshooting

Symptom
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not • This unit can only display uppercase letters, numbers,
displayed.
• Depending on the display language you have selected
DAB reception is poor.
"CHK ANTENNA"
"RELATED SERV FOUND" • Press the volume knob to activate Soft-Link.
• Press
• Radio reception is poor.
• Static noise while listening
to the radio.
Remedy
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Reset the unit. (Page 4)
and a limited number of symbols.
(page 6), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 8)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 8)
(Page 8)
to cancel.
Connect the antenna firmly.
ENGLISH
29