Table of Contents
Advertisement
54
EN
AV1 SELECT Setting
Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of
this recorder.
Press M EN U to access the Main Menu screen.
1
Press %fi to move the highlight bar (pointer) to "MODE SET", then press O K or
2
Press %fi to move the highlight bar (pointer) to "AV1 SELECT".
3
Press O K or
to select "VIDEO" or "S-VIDEO".
4
#
a– VIDEO
b– S-VIDEO
Press M EN U to return to normal screen.
5
● If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER
connector of this recorder.
Press M EN U to access the Main Menu screen.
1
Press %fi to move the highlight bar (pointer) to "MODE SET", then press O K or
2
Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
Press O K or
to select "AV2", "DECODER" or "SAT".
4
#
a– AV2
b– DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c– SAT
Press M EN U to return to normal screen.
5
● If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2
SELECT" back to "DECODER" after editing.
● If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT"
set to "AV2".
● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut
or because the AC was removed from the recorder, "AV2" will be automatically selected when
the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT"
back to "DECODER".
● If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT" to
"DECODER".
Downloaded from:
https://www.usersmanualguide.com/
: If a connected device's output is compatible only with regular video signals,
set "AV1 SELECT" to "VIDEO".
: If a connected device's output is compatible with Y/C signals, set "AV1
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
: To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.
: To view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (
.
#
.
#
pg. 57)
ED ITIN G (cont.)
MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
AUTO SP=LP TIMER
OFF
DIGITAL 3R
ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
POWER SAVE
OFF
S-VHS
AUTO
AV1 SELECT
VIDEO
AV2 SELECT
AV2
COLOUR SYSTEM PAL/NTSC
DV SOUND
SOUND1
AUDIO REC
NICAM
[5∞] =
[MENU] : EXIT
MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
AUTO SP=LP TIMER
OFF
DIGITAL 3R
ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
POWER SAVE
OFF
S-VHS
AUTO
AV1 SELECT
VIDEO
AV2 SELECT
AV2
COLOUR SYSTEM PAL/NTSC
DV SOUND
SOUND1
AUDIO REC
NICAM
[5∞] =
[MENU] : EXIT
Advertisement
Table of Contents
