To Install Batteries In The Remote Control Unit - JVC XV-501BK Instructions Manual

Downloaded from: https://www.usersmanualguide.com/

To install batteries in the remote control unit

The battery com partm ent is located on the back of the rem ote control unit.
1
Press dow n on the point show n by the arrow at the top of the com partm ent
cover, and pull up the cover to open the com partm ent.
2
Place the tw o accessory R6P (SUM -3)/AA(15F) batteries in the rem ote control
according to the polarity m arkings (" +" and " –" ) inside the com partm ent and
on the batteries.
3
Place the cover over the com partm ent, and press dow n lightly.
• The batteries w ill last about six m onths w ith norm al use. If the functions of the
rem ote control becom e erratic, replace the batteries. See " Precautions for the
safe use of batteries" below for m ore inform ation.
Precautions for the safe use of batteries
Observe the follow ing precautions for the safe use of batteries. If they are used
im properly, their life w ill be shortened, they m ay burst or their contents m ay leak.
Precaution
Remove the batteries from the remote control if it is not going to be used
for a long period of time.
Remove dead batteries and dispose of them properly.
Never leave dead batteries lying around, take them apart, mix them w ith
other refuse, or throw them into an incinerator.
Never touch liquid that has leaked out of a battery.
Do not mix new and old batteries, or batteries of different types, w hen
replacing them.
Getting started
21