D-Link DCS-80-5 Quick Installation Manual page 3

Figure 2. Alarm Board Diagram
10 (J2)
Pin Definition
ALR_COM ALARM
COM
ALR_NC ALARM
Normal
Close
ALR_NO ALARM
Normal
Open
ALR_GND ALARM
GND
ALARM 8 ALARM
PIN 8
ALARM 7 ALARM
PIN 7
Table 3. Alarm Board Pin Definition
11 (J3)
Pin Definition
ALARM 6 ALARM
PIN 6
ALARM 5 ALARM
PIN 5
ALARM 4 ALARM
PIN 4
ALARM 3 ALARM
PIN 3
ALARM 2 ALARM
PIN 2
ALARM 1 ALARM
PIN 1
Table 4. Alarm Board Pin Definition
8 (J1)
Pin Definition
ALR_COM ALARM
COM
ALR_NC ALARM
Normal
Close
ALR_NO ALARM
Normal
Open
ALR_GND ALARM
GND
ALARM 8 ALARM
PIN 8
ALARM 7 ALARM
PIN 7
9 (J4)
Pin Definition
ALARM 6 ALARM
PIN 6
ALARM 5 ALARM
PIN 5
ALARM 4 ALARM
PIN 4
ALARM 3 ALARM
PIN 3
ALARM 2 ALARM
PIN 2
ALARM 1 ALARM
PIN 1
C1 C2 C3 C4
Port Cable Diameter
C1, C3 6 mm - 12 mm
C2, C4 10 mm - 14 mm
Table 5. Internal Diagram
Connection Notice
- Connect any devices first before plugging in
the power supply.
- Verify that the power box model meets the
voltage requirements of your device.
Preparation Before Installation
Prepare the power box for installation:
- Remove the screws from the lid of the power
box.
- Remove the lid, and set it aside.
- Remove the padding from the enclosure.
- Refer to the power box diagram in this
manual when attaching data and power
cables.
- Refer to the alarm board diagram to attach
alarm wiring if needed.
- Specify the appropriate adapter voltage.
D-Link DCS-80-5/6 Outdoor Power Box  3 D-Link DCS-80-5/6 Outdoor Power Box  3
Purpose
For Power Cord (AC
110 V/220 V
or AC 24 V)
For Dome Camera or
External Data Cable