Selecting A Supported Display Mode - Lenovo G34w-30 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.This is
normal and the image can be re-adjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach the
CRT monitor temporarily until you have re-configured the system; preferably to
at
to 3440x1440 at 170Hz.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Timing
720x400
640x480
640x480
640x480
800x600
800x600
800x600
1024x768
1024x768
1024x768
1280x1024
1280x1024
1280x1024
1440x900
1600x900
1680x1050
1920x1080
1920x1080
2560x1440
2560x1440
3440x1440
3440x1440
3440x1440
3440x1440
3440x1440
60Hz, which is a common display mode. DP signal temporarily supports overclocking up
Refresh rate(Hz)
70Hz
60Hz
72Hz
75Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
60Hz
70Hz
75Hz
60Hz
60Hz
60Hz
60Hz
120Hz
60Hz
120Hz
60Hz
100Hz
120Hz(only for DP port)
144Hz(only for DP port)
165Hz(only for DP port)
Chapter 2.Adjusting and using your monitor 2-7
3440 x 1440