Advertisement
TRANSMISSION DRIVE BELT
TRANSMISSION DRIVE BELT
TRANSMISSION DRIVE BELT
TRANSMISSION DRIVE BELT
TRANSMISSION DRIVE BELT
To increase the tension of the transmission belt, loosen
the nut on the underside of the transmission idler pulley
located under the rear deck, slide the idler assembly
inward to increase tension and tighten the nut to secure.
See figures 4 & 5.
BELT GUIDES
BELT GUIDES
BELT GUIDES
BELT GUIDES
BELT GUIDES
Belt guides under rear deck are adjusted as shown in
figures 4 and 5
NOTE: The blades should come to a stop from
NOTE: The blades should come to a stop from
NOTE: The blades should come to a stop from
NOTE: The blades should come to a stop from
NOTE: The blades should come to a stop from
maximum speed within 7 seconds after
maximum speed within 7 seconds after
maximum speed within 7 seconds after
maximum speed within 7 seconds after
maximum speed within 7 seconds after
disengaging.
disengaging.
disengaging.
disengaging.
disengaging.
32" & 36" MODEL
32" & 36" MODEL
32" & 36" MODEL
32" & 36" MODEL
32" & 36" MODEL
1/8" CLEARANCE
102036
1/2"
103462
ENGINE PULLEY
103463
1/8" CLEARANCE
TRANSMISSION IDLER PULLEY
SETUP AND ADJUSTMENTS FOR
SETUP AND ADJUSTMENTS FOR
SETUP AND ADJUSTMENTS FOR
SETUP AND ADJUSTMENTS FOR
SETUP AND ADJUSTMENTS FOR
HUSQVARNA 32", 36" AND 48" COMMERCIAL MOWERS
HUSQVARNA 32", 36" AND 48" COMMERCIAL MOWERS
HUSQVARNA 32", 36" AND 48" COMMERCIAL MOWERS
HUSQVARNA 32", 36" AND 48" COMMERCIAL MOWERS
HUSQVARNA 32", 36" AND 48" COMMERCIAL MOWERS
TRANSMISSION BELT
Figure 4
BLADE ENGAGEMENT LEVER
BLADE ENGAGEMENT LEVER
BLADE ENGAGEMENT LEVER
BLADE ENGAGEMENT LEVER
BLADE ENGAGEMENT LEVER
The blade engagement lever needs to be adjusted so
the lever does not come in contact with control panel
when the lever is in the off position.
To adjust, remove the clevis pin from the yoke and
adjust by turning the yoke. The clevis pin connects the
blade engagement lever to the yoke, and the yoke is
connected to the blade engagement rod that runs to the
bellcrank on the rear deck.
1/4" CLEARANCE
103462
102036
1/2"
ENGINE PULLEY
103462
1/8" CLEARANCE
TRANSMISSION IDLER PULLEY
6
48" MODEL
48" MODEL
48" MODEL
48" MODEL
48" MODEL
TRANSMISSION BELT
Figure 5
Advertisement
