Contents 1 Important safety instructions Hearing safety General information 2 Your Bluetooth on-ear headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to your Bluetooth device Manage your calls and music...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat. Do not drop your headphones. Hearing safety Headphones shall not be exposed to dripping or splashing. (Refer to the IP rating of speci�c product) ...
2 Your Bluetooth on-ear Quick start guide headphones Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, Global Warranty register your product at www.philips.com/support. With these Philips on-ear headphones, you can: •...
Overview of your Bluetooth wireless headphones Volume + / Next track Multi-Function Button (MFB) Volume - / Previous track LED indicator USB-C charging slot Microphone...
The following example shows you how to pair the headphones with your mobile Normally, a full charge takes two hours. phone. Activate the Bluetooth feature of your mobile phone, select Philips TAH1108 Philips TAH1108...
4 Use your Manage your calls and headphones music On/off Button Task Operation Connect the headphones Turn the Press and hold for to your Bluetooth device headphones on two seconds Turn the Press and hold for headphones off four seconds Turn on your mobile phone/ The white LED is on and fades out...
Page 8
Other headphones indicator status Headphones status Indicator The headphones are The LED �ashes blue ready for pairing and white alternately The headphones are The white LED �ashes on but not connected slowly. If no connection to a Bluetooth device can be made, the headphones will turn itself off...
We strongly advise you to take your product to an This product complies with all applicable official collection point or a Philips service centre to have a professional remove the standards and regulations regarding rechargeable battery. Inform yourself exposure to electromagnetic �elds.
if not installed and used in accordance Environmental information with the instruction manual, may cause harmful interference to radio All unnecessary packaging has been communications. omitted. We have tried to make the However, there is no guarantee that packaging easy to separate into three interference will not occur in a particular materials: cardboard (box), polystyrene installation.
7 Trademarks L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts Bluetooth de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne The Bluetooth word mark and logos are ®...
Pull down the extension arm of the headphones appropriate volume level. You can now view the additional information underneath The model and safety information are printed on the speaker covers of both sides For further support, visit www.philips.com/support.
Page 14
Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.