1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the side panel left. (Refer to page 2-1 in Disassembly section)
2. Insert a pin or clip in the hole of a drive to open the tray.
❶ Insert a pin or clip in the hole of drive to open the a tray
1-2 WORK WHEN OPTICAL DEVICE ARE REPLACE
Note : Please do the following work when replace the Optical Unit (BU)
Details refer to 1.4-7 BU Data Decode Jig on page
A
SECTION 1
SERVICE NOTE
1-7
Shoot the barcode
Format is JPEG
Application Software
UHDBUDecode.exe
Data convert from JPEG TEXT
❷ Tray open
A
Save the TEXT(.txt) data
USB memory is connected to USB port on
the front unit, and the TEXT data as new
data is loaded to unit by Service Mode
1-1