Bluetooth - Philips Pi3900 User Manual

b Select the option to switch on

Bluetooth.

is displayed on the status bar.
»
c Tap SEARCH FOR DEVICES.
» The device is displayed under
AVAILABLE DEVICES after it is
discovered.
3
Pair with the device:
On Pi3900, tap the device, and enter
the passcode as prompted;
On the device, enter the passcode as
prompted.
» A message is displayed when the
pairing is complete.
Get connected by another Bluetooth
devices
1
Make sure that Pi3900 is discoverable by
another Bluetooth device:
a From the Home screen, tap
Settings > Bluetooth.
b Select the option to switch on
Bluetooth.
c Tap Pi3900.
» *Pi3900 is discoverable for two
minutes.
2
On the Bluetooth device, search for and
pair with Pi3900.
For information about the steps,
consult the user manual of the
Bluetooth device.
16 EN
Tip
* To change the device name of Pi3900, go to
Settings > Bluetooth, tap
Bluetooth
1
Make sure that
you have paired Pi3900 with the
Bluetooth device;
on Pi3900 and Bluetooth device,
Bluetooth is on.
2
On Pi3900
a In Gallery, play a photo. Tap
Bluetooth.
b Tap the paired device to start sending.
» When sending or receiving is in
progress,
of the screen.
3
1
Make sure that
you have paired Pi3900 with the
Bluetooth device;
on Pi3900and Bluetooth device,
Bluetooth is on.
2
Pi3900 through Bluetooth.
3
On Pi3900
At the top of the screen, tap .
»
and select
and select Rename tablet.
>
is displayed at the top
Settings> Bluetooth. Tap
.