Keyboard Cable Connection - Epson Equity I User Manual

With the front of the main unit facing you, open the cover at the lower
right front corner. Insert the keyboard connector as shown in Figure 2-2.
Do not force the connector, but make sure you insert it all the way See
that the cable exits to the right of the main unit. Gently push the cable
into the retaining clip, and close the cover.
Figure 2-2. Keyboard cable connection
You can use the keyboard at different angles such as laying it flat on a
desk or placing it on your lap. You can also tilt the keyboard by adjusting
the legs on the bottom. Adjust the keyboard legs by turning the key-
board over, reaching under the lip and lifting each of the legs upward
until they lock into place. See Figure
2-3.
13