Installing The Drive - Epson Equity 386/33 PLUS User Manual

Then place the flat side of the mounting plate on the hard disk
drive and align the four holes on the plate with the four
holes on the drive, as shown below.
Use the four screws that came in your hard disk drive kit to
3.
secure the mounting plate to the drive.

Installing the Drive

If you are going to install or remove a drive in one of the
horizontal drive bays, first follow the instructions under
"Installing or Removing a Drive in the Horizontal Position" on
page 5-19. Do not install the vertically mounted drive until you
finish installing or removing any horizontal drives.
mounting plate holes
Installing and Removing Drives
5-11