Defining Your Own Drive Type - Epson EL 486UC User Manual

Defining your own drive type

If the parameters for your hard disk (listed in its
documentation) do not match any of the types listed in the table
above, you can define your own type. Follow these steps:
1. Move your cursor to
until you see drive type 48 or 49.
2.
Press
3. Type the appropriate cylinder value for your hard disk. The
documentation that came with your hard disk drive will
provide the appropriate information.
4. Continue pressing
type in the appropriate values,
If you are installing Epson-supplied drives, use
in the following table to define your drive type.
Epson-supplied hard disk drive types
Actual formatted size may be slightly different than size on drive label.
l
** If you have one of these hard disk drives, make sure you set the Shadow
BIOS ROM
Hard Disk 1
to move the cursor to the
WP-Shadow or Cacheable.
OptiOn to
or 2 and press + or -
Cyl
to move the cursor to the
Setting Up Your System
field.
field and
next
information
the
1-15