Connecting The Keyboard; Opening The Keyboard Socket Cover - Epson Apex 110 User's Manual And Diagnostics

Monitor
Monochrome
C o l o r o r
Enhanced color
3.
Plug the monitor's power cable first into the power inlet on the monitor
and then into an electrical outlet. If a monochrome monitor has the
proper type of plug, you can plug it into the auxiliary outlet next to the
power inlet at the back of the main unit. The monitor's power consump-
tion must not be more than 80 watts.
4. When you check the DIP switch settings, as defined later in this chapter,
be sure they are set correctly for the type of monitor you have.
5.
If you have trouble getting a display, check that the brightness and con-
trast controls on the monitor are set correctly. Monitors usually have
their own power switches. Make sure the power switch is on.

Connecting the Keyboard

6
Follow these steps to connect the keyboard:
1. Open the cover at the lower right front corner of the main unit, as
shown in Figure 1-6.
1-8
Table 1-1. Monitor/video curd compatibility
Video card
Monochrome or graphics
or enhanced graphics
Graphics or color graphics
or enhanced graphics
Figure 1-6. Opening the keyboard socket cover
output type
One 9-pin output (TTL
c o m p a t i b l e )
One 9-pin RGB output, or one
RCA-type jack for composite
v i d e o