Motorola VM35, VM35-2, VM35-3, VM35-4 Quick Start

Setting up your Digital Video Baby Monitor

1. Connecting the Power Supply for the Baby Unit
   

• Insert the DC plug of the poweradapter into the DC socket on the back of the Baby Unit.
• Connect the other end of the poweradapter to a suitable power socket.
• The baby unit turns on and the powerindicator lights Blue.

Note
Only use the supplied power adapter

STRANGULATION HAZARD.
Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.

• Connect the small plug of the power adapterto the parent unit and the other end to the mains power. Only use the enclosed adapter (5VDC/1.0A).
• A rechargeable battery (Lithium ion battery2000mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. The battery provides up to 5 hours operation of the Parent Unit. We recommend charging the for at least 16 hours before first use, and when the Parent Unit indicates the battery is low.
• Press and hold the POWER button 0 on the top of the Parent Unit to turn it ON.

NOTE
When the Baby and Parent Units are both turned on and within range, the Parent Unit should show a color image from the Baby Unit camera, but if the room is dark, the image will be in black and white, with an icon showing, due to the infra-red illumination by the Baby Unit.

3. Desktop Stand of the Parent Unit

• Flip out the stand on the back of the Parent Unit
• Recommend to rotate it by 90 degree to set up the desktop stand.
  

NOTE
Place the parent unit on a flat, even surface.

Basic operation of the keys

Parent unit
	ON/OFF button	Press and hold to switch the Parent Unit ON/OFF.
	UP/DOWN buttons	Press to adjust menu setting when menu is active.
	LEFT/RIGHT buttons	Press to access menu options when menu is active.
	MENU button	Press to open menu options or exit the menu.
	OK button	Press to confirm a selection.
	VIDEO button	Press to turn the LCD screen ON/OFF.
	TALK button	Press and hold to talk to your baby.
	Volume button	Press -/+ to select volume level of the Parent Unit.
	RESET button	Press and hold with a small pin to reset the unit.
Baby Unit
PAIR button		Press and hold to pair with the Parent Unit.