Electrolux EW30IF60IS Use And Care Manual page 16

16 Setting Induction Controls
Before Operating the
Induction Cooktop
The Induction cooktop control provides 4 digital
display windows to help when setting power levels
for each of the cooking zones (Fig. 1). These
settings are shown using LED style displays.
NOTE
• Unlike standard ceramic cooktops, Induction
cooking zones do not heat and will not glow
red when active. Only the pan heats. Also,
Induction cooking zones cannot be turned ON
without a properly placed pan made of
magnetic material such as steel or cast iron.
This feature helps reduce accidental turn-ons.
Cooking Zone ON/OFF
Each cooking zone display window has an ON OFF
activation key. Touch the corresponding cooking
zone ON OFF key once to activate the cooking
zone needed. When a cooking zone is activated,
0.0 (Fig. 2) will appear in the display window. If any
of the corresponding hi +, med, or lo - power level
keys are not touched within 5 seconds, the request
to activate the cooking zone will cancel.
To turn OFF an active cooking zone, touch the
corresponding cooking zone ON OFF key once.
Induction Power Level Settings
Once activated each cooking zone will provide 23
power levels to choose from. These include Lo (Fig.
3), 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.5,
4.0, 4.5, 5.0 (Fig. 4), 5.5, 6.0, 6.5, 7.0, 8.0, 9.0, Hi
(Fig. 5) and Pb (See Fig. 6).
The highest setting of Pb (Power Boost) provides
the maximum power level for up to 10 minutes (See
Fig. 6). After 10 minutes, the cooking zone will
automatically lower to the Hi setting. The Power
Boost setting is only available immediately after
activating a cooking zone and by pressing hi+.
If Pb is active, but the Hi setting is preferred over
Pb, touch the lo- key once to adjust down to the Hi
setting.
Right
Left
rear
rear
Right
Left
front
front
Fig. 1
Fig.2
Fig. 3
Fig. 4 Fig. 5
Fig. 6