Section 6: Maintenance; Cleaning & Protecting - Grizzly T33304 Owner's Manual

SECTION 6: MAINTENANCE

Always DISCONNECT BATTERY
from tool before
adjusting, or doing maintenance to
reduce the risk of injury due to tool
starting accidentally.
Schedule
For optimum performance from this tool,
this maintenance schedule must be strictly
followed.
Ongoing
To minimize your risk of injury and main-
tain proper tool operation, shut down the
tool immediately if you ever observe any of
the items below, and fix the problem before
continuing operations:
• Loose bolts.
• Damaged/dull bit.
• Worn or damaged wires.
• Regularly wipe down machine with a
soft cloth.
• Any other unsafe condition.
Model T33304 (Mfd. Since 05/22)
servicing,
Cleaning the Model
easy. Vacuum excess wood chips and
sawdust, and wipe off the remaining dust
with a dry cloth. If any resin has built up,
use a resin dissolving cleaner to remove it.
Inspect the router for loose parts, damaged
cord or switch, and inspect the bits for
chips or cracks. Replace the bit if it is worn
or damaged. Continuous use of a worn or
damaged bit will not only decrease work-
ing efficiency, but also overload the motor,
so the bit must be frequently checked.
Cleaning & Protecting
T33304 is relatively
-27
-