This topic provides some basic and specific information about jumpers and switches. It also describes the connectors on the
various boards in the system. Jumpers on the system board help to disable the system and reset the passwords. To install
components and cables correctly, you must know the connectors on the system board.
Topics:
•
System board jumpers and connectors
•
System board jumper settings
•
Disabling a forgotten password
System board jumpers and connectors
Figure 101. System board jumpers and connectors
1. Riser 1 (R1A/R1B) connector
3. Processor 1
5. Processor 2
7. MCIO connector 3 (SL3_CPU2_PA4)
9. MCIO connector 5 (SL5_CPU2_PA3)
11. BOSS card connector
13. Riser 2 (R2A/R2B) connector
15. Swift connector 2 (SL2_CPU_PB1)
17. LOM card connector
System board jumper settings
For information about resetting the password jumper to disable a password, see the
Jumpers and connectors
2. Coin cell battery
4. DIMM slots for processor 1
6. DIMM slots for processor 2
8. MCIO connector 4 (SL4_CPU2_PB3)
10. DIMM slots for processor 2
12. DIMM slots for processor 1
14. TPM connector
16. NPIO connector 1 (SL1_PCH_SA0)
Disabling a forgotten password
section.
Jumpers and connectors
9
127