How To Clear User Setting; Resetting Both Base Unit And Handset - Panasonic KX-PRX120W Service Manual

KX-PRX120W/KX-PRXA10W
8.4.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase stored Phone numbers, Caller list and etc.)
Note:
• Some menus are not reset. Refer to Operating Instructions (P.16).
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
8.4.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps
will not be reset.
1
Connect the AC adaptor to the base unit and install the charged batteries into the handset.
2
Confirm the handset is registered to the base unit (
If the handset is not registered to the base unit (
3
Press "*#72627664*#" to enter Factory Mode.
4
Factory Reset --> Factory reset1
5
Keep pressing Power Button at language select screen and select shutdown.
6
Disconnect the AC adaptor of Base unit.
7
Keep pressing the power key and home key at the same time until "Android system recovery" is displayed.
(about 10 seconds)
8
Move the focus to "wipe data/factory reset" by Volume button and push the power key.
9
Move the focus to "Yes -- delete all user data" by Volume button and push the power key
10 Remove the battery after the "Data wipe complete."
Note:
(*1) Refer to Registering a Handset to a Base Unit in the Operating Instructions.
w
Handset
to
Base unit
).
), register it. (*1)
20
are reset. Other registered handsets
10