Chapter 25: Scan; Turning Scan On Or Off; Turning Scan On; Turning Scan Off - Motorola WAVE PTX TLK 110 User Manual

Chapter 25
Scan
Scan allows your radio to monitor multiple Talkgroups in the programmed scan list to look for an active
Talkgroup.
When in the scan mode, the system preempts an ongoing low-priority talkgroup call. Your radio
unmutes to the high-priority talkgroup call. You respond to the active talkgroup when you press the
PTT button during the programmed period (hang time) of an ongoing call from your scan list.
Pressing the PTT button when the radio is not in a call causes the radio to start a call on the last
selected talkgroup.
NOTE: If the DND mode is enabled during the scan mode, your radio prioritizes the DND mode.
25.1

Turning Scan On or Off

Turning Scan On

Procedure:
1 From the menu, select Scan
2 To turn Scan on, press the Volume Up button.
If Scan is on, your radio shows the following indications:
• The amber LED blinks.
• The display shows a positive mini notice.
• The voice announcement sounds.

Turning Scan Off

Procedure:
To turn Scan off, press the Volume Down button.
If Scan is off, your radio shows the following indications:
• The display shows a negative mini notice.
• The voice announcement sounds.
MN009326A01-AA
Scan
53