1 - 12 MC55 User Guide
Handstrap Replacement
Removal
To remove a handstrap from the MC55:
Pull up on the handstrap to remove the handstrap bracket from the end cap.
1.
Handstrap bracket Removal
Figure 1-10
Remove the battery.
2.
Using a small flat screwdriver, push the head of the screwdriver between the handstrap pin and the bottom of
3.
the housing as shown below.
Pry the handstrap and pin up and out of the handstrap mount area.
4.
Handstrap and Pin Removal
Figure 1-11
Repeat for the other side of the handstrap.
5.